PSC Falcon 4420 48-Key Instrucciones de operaciones descargar pdf (Pagina 18)

Setting Up the Mobile Computer

16 Falcon

4400 Series with Windows

Radio Card Setup

For assistance in configuring the radio card, tap the question mark on your

Falcon to access the Microsoft online help. Windows Zero Config should be

used to administer the radio for cards not specifically listed (for example,

Broadcom-based radio). Refer to the manufacturer of your radio card for fur-

ther information.

Installing the USB Driver

So the Host PC can communicate with the Falcon, install the USB driver file

from the CD that came with the Falcon, or download it from the PSC website.

Follow the directions on the CD, or use the following instructions:

1. Microsoft® ActiveSync must be installed on your computer before pro-

ceeding. Go to www.microsoft.com for information.

2. Copy the current USB driver file from the Falcon CD to the

C:\Pro-

gram Files\Microsoft ActiveSync\Drivers

3. Connect the USB cable to the Falcon or place the Falcon in the dock.

4. Connect the USB cable to the Host PC.

5. Follow directions on screen. The specified source directory is the one

identified in step 2.

Serial Cable Setup

1. To connect the Falcon using a Serial cable, go to Start > Settings > Control

Panel > PC Connection.

2. If not already checked, select Enable direct connections to the desktop com-

puter

3. Click on

Change Connection and select Serial from the dropdown box.

4. Click

OK.

Network Setup

To set up the Network connection settings, complete the following steps:

1. Select

Start > Settings > Network and Dialup Connections.

2. Double-tap on the wireless card icon (varies based upon the radio

installed and the number of connections).

3. Complete the two tabs (shown in Figure 8 on page 17):

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 63 64

Sin comentarios

PSC Falcon 4420 48-Key Instrucciones de operaciones Pagina 18