
Configure PowerNet Twin Client
PowerNet Twin Client User Guide < 1-9 >
5. Press the <F3> key to save the IP settings and return to the
Configuration Menu.
Consult the IS manager at the installation site to coordinate the IP addresses
of the Falcons with the rest of the network installation.
For DHCP support: Enter
0.0.0.1 as the IP address. (Datalight™
TCP/IP stack only)
Edit Host List
PowerNet Twin Client supports up to five host machines. The host list
option sets the IP address for each host machine. A sample
host list
screen is displayed in
Figure 1-4.
Complete the following steps to configure the host’s IP address:
1. Using the Falcon’s up and down-arrow keys ( and ), highlight
the
Edit Host List function and press the ENTER key.
2. Enter the IP address of the host application server in the
IP field
and press the
ENTER key.
3. Enter the port for the telnet session in the
Port field and press the
ENTER key. The default port value is 23.
w
ww
w Contact the network administrator if there is any confusion on
the port value.
4. Repeat steps 2 and 3 until each host IP address has been entered.
Figure 1-4
Sample Host List Configuration Screen
Host n
IP nnn.nnn.nnn.nnn
Port nnnn
<F3> Save <F7> Quit
Comentarios a estos manuales