PSC FALCON 315 Guía de usuario Pagina 82

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 138
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 81
Extended Commands
< 6-4 > PowerNet Twin Client User Guide
Input Mode
The host application can control which inputs the terminal will accept.
A scanner, keyboard, or both can be accepted.
Input Mode parameters are controlled by sending the following
sequence to the Falcon before opening an input field:
<ESC>[!1; <mode>z.
Table 6-1
Input Mode Parameters
Mode Action Description
0 (de-
fault)
Scan
and
key
Data is initially accepted from either the keyboard or
scanner. Scanning is allowed on a partially keyed
field, which causes the keyed data to be discarded
and the scanned data to be accepted.
1
Scan
or key
Data is initially accepted from either the keyboard or
scanner. Scanning is not allowed on a partially
keyed field. If the operator clears the field then
scanning is again allowed.
2
Scan
only
Data is accepted only from the scanner; the
keyboard is turned off.
3
Key
only
Data is accepted only from the keyboard; the
scanner is turned off.
Vista de pagina 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 137 138

Comentarios a estos manuales

Sin comentarios